Remington Pearl Pro Styler CI9522 Mode D'emploi page 5

ENGLISH
Due to the extreme heat capabilities of this styler, extra care should be taken when using.
While heating, during use and cooling, place on a flat, smooth, heat-resistant surface. Only
hold unit at the end of the handle.
This is a high performance product; avoid frequent use to prevent damage to hair.
Please note regular use of styling products may deteriorate the coating.
Do not scratch the surface, as this will deteriorate the effectiveness of the coating.
Ensure the unit is unplugged and cool. Wipe clean any build up of styling products with a damp
cloth. Do not use an abrasive cleaning fluid to clean, as damage will occur.
WARNING – FOR ADDITIONAL PROTECTION THE INSTALLATION
OF A RESIDUAL CURRENT DEVICE (RCD) WITH A RATED RESIDUAL
OPERATING CURRENT NOT EXCEEDING 30mA IS ADVISABLE. ASK AN
ELECTRICIAN FOR ADVICE.
WARNING – THIS APPLIANCE MUST NOT BE TAKEN INTO A BATHROOM,
IT SHOULD NOT BE USED NEAR BATHTUBS, SHOWERS, BASINS OR
OTHER VESSELS CONTAINING WATER OR OTHER LIQUIDS.
110438 REM IFU Ci9522_21L.indd GB_3
IMPORTANT INSTRUCTIONS
CLEANING AND MA INTENANCE
SAFETY CAUTIONS
This product is not suitable for use in bath or shower.
Step 5
Hold hair in place around the styler for 10 seconds and
then release to form the curl. Repeat these steps around
the head until all hair is curled.
3
24.06.11 16:43