Publicité
Les langues disponibles
Les langues disponibles
ADJUSTING HEIGHT
First Step: Before the dishwasher is placed in the cabinetry, the front feet are closed until the end and
the dishwasher is placed in the cabinetry.
Second Step: Adjust the forefoot level with a flat screwdriver to stabilize the dishwasher and raise it
to the enclosure height.
Third Step: Adjust the rear foot level with a Philips screwdriver to balance and raise the dishwasher to
the enclosure height.
- Make sure the dishwasher is plumb and notice dishwasher can be placed with a small clearance
under the countertop.
- For the front foot, turning the feet in the direction of the black arrows with the flat screwdriver allows
the dishwasher to move downwards.
- For the rear foot, Turning the Philips screwdriver in the direction of the black arrows will take
the dishwasher feet down.
If the height of the enclosure is 32 9/32" to 34 9/32" (820mm-870mm) use short supports as shown in
the figure.
If the height of the enclosure is above 32 9/32" (870mm) use long supports as shown in the figure.
9
Publicité
