Summit DW185SSADA Instructions D'installation page 15

ADJUSTING THE MOVABLE TOE KICK (MODEL DEPENDING)
Now that you have successfully installed the dishwasher, you need to attach the toe kick to the
dishwasher. The two-piece toe kick can be adjusted to the height and depth needed for your kitchen.
1.
o
t
C. The adjustable plinth number is
determined according to the required
distance and assembled to each other.
D. As shown in the image to the right, the
cylindrical feet of the adjustable plinth are
attached to the plinth fixing metal parts and
shifted through the cavity of the part.
A. If the height is 32 9/32" to 34 9/32" (820mm-870mm)
and uses short supports:
adjustable plinth metal with 80 mm length (v), toe kick
brackets(o) are installed. Mounting is done using
Screws Ø 5/32" x 7/32" (Ø 4mm x 6mm) with a Philips
Screwdriver.
B. A. If the height is above 34 9/32" (870mm) and
uses short supports; adjustable plinth metal with 130
p
mm length (v), toe kick brackets(o) are installed.
Mounting is done using Screws Ø 5/32" x 7/32" (Ø
4mm x 6mm) with a Philips Screwdriver.
E. Depending on the desired depth, plinth
F. Finally, Toe kick brackets(o) are attached to
15
r
locking(y) is attached to the toe kick bracket(o).
the gaps under the machine and the installation
is completed.
870x1
880x2
890x3
900x4
910x5/6
s
870x1
880x2
890x3
900x4
910x5/6
s