Publicité
Les langues disponibles
Les langues disponibles
WATER SUPPLY CONNECTION
Water supply may be connected to the dishwasher in one of two ways:
- With metal braided hose.
- With copper tubing BRAIDED
HOSE/COPPER TUBING
After connections are made turn on the water supply to check for leaks.
Hot water supply line: Use minimum 3/4" O.D. copper tubing or metal braided dishwasher supply line.
"Water Inlet valve of dishwasher has 3/4"-11.5NH inlet coupling thread dimension according to
•
ASME B1.20.7-1991.
When you are buying water inlet hose for your dishwasher, please choose the thread dimension of
•
the inlet hose as compatible with indicated water inlet valve inlet coupling thread dimension (3/4"-
11.5NH) of your dishwasher.
Temperatures required for soldering and sweating will damage the dishwasher's water inlet valve so if
•
any such operation is needed, keep the heat source min. 77/8" (200mm) away from the dishwasher's
water inlet valve.
There should not be any sharp bends in the water line that may restrict the water flow.
•
Teflon tape or pipe tread compound must be used for sealing the connection. Before connecting the
•
copper water supply line to the dishwasher, flush it with hot water to clear any foreign material.
10
Publicité
