Master Forge H30XL Instructions D'utilisation Et Manuel Du Propriétaire page 4

GETTING STARTED
Display Panel
Screws (x4)
ACCESSORY KIT
Flex Hose
WHAT YOU'LL NEED (NOT SUPPLIED)
TOOLS REQUIRED
• Tape Measure
• Phillips Screwdriver or Comparable Electric Screw
Driver & Drill Bit.
• Stud Finder
• Plumb Bob
• Reciprocating Saw
• High Temperature Silicone or High Temperature
Sealant or High Temparture Flue Tape
• Floor Protection (see "FLOORING SPACE" and
"FLOORING MATERIAL" on page 6)
• Manufactured venting of 3" (80mm) in diameter
of type "L" or "PL" which is listed to UL 641, ULC
S609 (Standard for 650°C Factory-Built
ULC/ORD C441. Install per chimney manufacturer's
instructions (see page 9)
Master Forge Wood Pellet Fire Stove
Firepot
Exhaust Exhaust Connector
Connector
Termination Cap
and Screws (x4)
Chimneys), or
Cover Main Power Cord
Stove Feet
Silicon Pad
Hose Clamp Fresh Air Adapter
SAFETY EQUIPMENT (RECOMMENDED)
• Safety Glasses
• Gloves
• Closed-toed Shoes
• A friend (the stove is heavy, do not attempt to move
the stove without assistance)
4
Operating Instructions and Owner's Manual
Allen Wrenches
(x2)
Cleaning Tool