Publicité
Les langues disponibles
Les langues disponibles
network. This process may take a few
minutes.
Step 12. After the device and stove are paired, you
will be able to see the pellet stove as a
connection option on the "Devices" tab at
the bottom of the app screen.
Step 13. On your device, go to your device's wifi
settings which will now include the stove
as an option. Select the stove as your wifi
connection.
Step 14. Open the Smart Stove phone app again.
Step 15. You may now select this stove from this
added devices list in order to monitor,
control, and program the stoves operation.
WIFI CONTROLS
Once connected to the stove (See step 1 1 of Wifi
Connection) you an remotely monitor and adjust the
operation of the stove. See below for explanation:
• Device Name: it is possible to rename the stove, so
that if you have multiple stoves set up for operation
you can more easily differentiate between while
using the smart stove application.
• Device Sharing: it is possible to share connection to
the stove with other devices via SMS or email.
• Eco Mode: There are two ECO settings which can
be selected which will conserve wood pellets while
maintaining the desired temperature. Pressing the
ECO button will allow you to toggle whether a
specific eco setting is enabled, or to turn off the
feature entirely.
• ECO 1: The stove shuts off when the desired
temperature has been reached. The stove will
turn back once the room cools to a factory set
temperature.
• ECO 2: The stove turns to minimum power
preset P4 when the desired temperature has
been reached. The stove will turn on to higher
power settings once the room cools to a factory
set temperature.
• Preset configurations: There are four selectable
configurations which adjust the speeds of the
combustion fan and the room air circulation fan.
Pressing the preset configuration button will allow
you to toggle whether a specific preset configuration
is enabled, or to turn off the feature entirely.
• P1 [High Power] Settings
• P2 [Medium-Plus Power] Settings
• P3 [Medium Power] Settings
• P4 [Low Power] Settings
Master Forge Wood Pellet Fire Stove
Device
Select
Screen
Stove
setting
Current
room
temperature
Eco Setting
Preset
configurations
Figure 16
Wifi Controls
16
Operating Instructions and Owner's Manual
Device Name and
Device Sharing
settings
Decrease stove
output
Increase stove
output
Program and
set stove
scheduled
operation
Publicité
