Publicité
Les langues disponibles
Les langues disponibles
MANUAL STOVE OPERATION
TO ADJUST THE AUGER (PELLET DROP RATE)
1. Cycle using the Rate Select button between
settings P1, P2, P3, P4. Rates are outlined below:
P1: [High] pellet drop rate
P2: [Medium-Plus] pellet drop rate
P3: [Medium] pellet drop rate
P4: [Low] pellet drop rate
Note: If necessary, press and hold the "Time" button
for 2-5 seconds to get the auger to spin.
TO ADJUST THE FANS
1. Press and hold the Settings button for 2 seconds.
2. Press the Confirm button to cycle to each of the
Pellet Drop Rate Settings.
3. Adjust the "S" for Venting Fan and "F" for blower
fan settings using the Up and Down Selectors
buttons.
4. Use the Time button to switch between "S" and
"F" Note: the lower the setting, the slower the fan.
Only change settings by a few numbers at a time.
5. Press the Settings button to go back to home
screen.
TO CHANGE THE TIME (RUNS ON 24-HOUR CLOCK)
1. Press and hold the Settings button for 2 seconds.
2. Press the Confirm button to cycle to Modify Clock.
3. Use the Time button to switch between hours and
minutes.
4. Use the Up and Down Selector buttons to change
the current selection.
5. Press the Settings button to go back to home.
TO PROGRAM AUTOMATIC ON/OFF
1. Press and hold the Settings button for 2 seconds.
2. Cycle through the settings using the Confirm
button until days of the week are visible.
3. Use the Time button to change between days.
4. Use the Up and Down Selector buttons to adjust if
you want the stove ON/OFF each day.
Note: Tall box is for ON; Short box is for OFF.
Note: Each box represents an hour of the day over a 24
hour period. The first box is 00:00 (Midnight) and the
last box is 23:00 (11 PM).
5. Press the Settings button to go back to home.
Master Forge Wood Pellet Fire Stove
CHANGING ECO MODES
1. Press and hold the Settings button until stove
beeps.
2. Press (do not hold) the Confirm button seven times
to cycle to the screen that reads "Eco Mode."
3. Press the Time button to swtich between the
selected Eco Modes.
4. Press the Settings button to go back to home
screen.
ECO 1 MODE
ECO 1: The stove shuts off when the desired
temperature has been reached. The stove will turn back
on once the room cools to a factory set temperature.
ECO 2 MODE
ECO 2: The stove turns to minimum power preset P4
when the desired temperature has been reached. The
stove will turn on to higher power settings once the
room cools to a factory set temperature.
CONTROL KEY
18
Operating Instructions and Owner's Manual
CONFIRM
UP SELECTOR
DOWN SELECTOR
TIME
RATE SELECT
SETTINGS
Publicité
