Before First Use - ChefLine UNE PORTE ARRIÈRE BAR Manuel D'utilisation

Before first use

 Remove all packaging ( Disposal of packaging).
 Check for completeness and transport
damage. In case of damage or incomplete
delivery please contact your d ealer
( Guarantee).
 Clean the appliance ( Cleaning).
 Place the appliance on a horizontal and
stable surface with a maximum incline of
5%. If any incline, please install the incline
fixing bracket. For the installation, refer
the picture on the right.
 First, take out the screw at mark 1 and
fix the fixing bracket with the screw at
mark 1.
 Drill a hole on the wall at mark 2 and fix
the fixing bracket with M6 expansion bolt.
 Note: screws are not included.
 Try to position the appliance close to a wall, but leave enough space for
ventilation to ensure good circulation and efficiency of the appliance.
 Do not position the appliance in direct sunlight or near any heat sources.
 Protect the appliance from moisture, extreme heat or cold.
 Please see the climate class and matched temperature range for
reference:
Test room climate class
1
2
3
4
5
 Never use an extension cord – risk of overheating! If the power cord (5)
does not reach the nearest mains outlet, either rearrange your store
layout or ask qualified personnel to fit a new outlet.
 The appliance is fitted with castors (6), so that you can easily move it
from one place to another. Warning! Do not move the appliance across
uneven floors or steps.
 If power is cut off, wait for at least 5 minutes before plugging the
appliance in again to avoid damaging the compressor.
GB
Dry bulb temperature
°C
16
22
25
30
40
9
Relative humidity
%
80
65
60
55
40