Publicité
Les langues disponibles
Les langues disponibles
The access to the laser emission zones should be reported using the signs in accordance
with the Ministerial Decree of 4 November 1993 "Signs of safety and health in the
workplace" and the NF X 08-003 "Symbols graphics and symbols - colors and safety signs
"of December 1994. This signaling is completed by the words of the class of laser product
and the instructions provided in the NF EN 60825-1 standard. Such access can be
controlled, at least when lasers are operating.
Emissions control: the control panel should be placed outside the locations exposed to
hazardous emissions. The control of lasers in Classes 3 and 4 should be under the control
of a key control, removed when the device is not in use and owned by a qualified person.
Disclaimer: The use of this device is exclusively for professional activities show and
display.
It is forbidden to allow projecting the beams to the audience and any areas accessible by
persons without appropriate eye and skin protective items. It is forbidden to use this
device for any other purpose than that for which it is intended.
It is forbidden to shine any laser beam to the aircrafts.
If the laser is operated in a situation where health or property injury may occur,
operation MUST be stopped immediately!
Manufacturer and distributors are not responsible for any damages caused by use of
BoomtoneDJ lasers. User is responsible for applying conditions of use according to
regulations stipulated in EN60825-1:2014 and all locally applicable safety laws and
regulations.
8
Publicité
