Publicité
Les langues disponibles
Les langues disponibles
Storage and cleaning
Storage
Preparing storage for long periods is vital to avoid
problems and increase the useful life of the chainsaw.
Never store the equipment with petrol in the tank.
Depending on the region and storage conditions, petrol
can deteriorate and oxidize, causing damages in the
carburetor and fuel system, difficult starts and clogging
caused by particle deposition.
Before storage proceed as follows:
1. Remove the fuel from the tank;
2. Start the engine until it stops due to lack of fuel;
3. Remove the spark plug and add 2-stroke engine oil
(5-10 cl) to the cylinder through the spark plug hole;
4. Place a clean cloth over the spark plug hole and pull
the starter handle to dispense the oil to the cylinder;
5. Pull the recoil starter slowly while feeling some
resistance. The piston rises and the intake and
exhaust valves are closed. Leaving the engine in this
position will help protect against internal corrosion;
6. Reinstall the spark plug;
Cleaning
The chainsaw must be thoroughly cleaned after each
use. Remove any waste accumulated in the saw chain.
Careful handling protects the equipment and extends
its service life.
ENVIRONMENTAL POLICY
The packaging is made up of recyclable materials,
which you can dispose on local recycling points.
Never dispose of combustion equipment in your
household waste!
Waste such as used oil, fuel, lubricant, filters and
wearing parts can harm humans, animals and the
environment and as such must be properly disposed of.
Make sure that the deactivated equipment is forwarded
for disposal in a technically correct way.
You can obtain information regarding the disposal of
the chainsaw through the person in charge for the
recycling in your city.
CUSTOMER SERVICE
Tel.:
+351 256 248 826
E-mail:
international@centrallobao.pt
Site:
www.centrallobao.pt
43
Publicité
