Unhook filter holder and empty the coffee grounds of the
previous coffee in the dregs drawer.
Fill the filter with one dose of ground coffee in the case of the
1-cup filterholder with conical filter or with two doses of ground
coffee in the case of a 2-cup filterholder with cylindrical filter.
Uniformly press the ground coffee in the filter by means of the
pressing disc of the grinder.
Clean the filter rim in order to eliminate the eventual ground
coffee.
Hook filterholder to the group and put one or two cups
underneath of the delivery spouts of filter holder.
Press the coffee dispensing button (2) and dispense.
When the desired dose is obtained, press button (2) again to
stop dispensing.
The machine has two steam spout.
A knob (13) control permits the gradual delivery of steam,
which is required for making emulsified beverages.
When heating a beverage, insert the steam spout (9) into the
beverage and then turn the knob.
When finished, turn off the steam.
Note: At the conclusion of each steam dispensing phase,
clean the inside of the steam nozzle as follows:
Turn the nozzle towards the cup tray and carefully
activate steam dispensing at least once.
11. Delivery of the coffee
11.1 Steam dispensing
33
2
13
9