Marantz professional PMD-500D Guide D'utilisation page 12

Additional Functions
To display track and disc information, press the Info button on the remote control. Continue to press
the button to change what appears in the Info display. You can choose Single Elapsed, Single Remain,
Total Elapsed, or Total Remain. Press Info again to turn the Info display Off.
To select a Repeat mode, press Repeat on the remote control, or press Shift and Skip Back (
PMD-500D. It will cycle through 3 modes:
•
Repeat Track: The current track will repeat continuously. In this Repeat mode, pressing will Skip
Back/Forward (
•
Repeat All: The entire disc will repeat continuously.
•
Off: Normal operation.
To loop a section of the track:
1. Set the desired starting point by pressing A-B on the remote control, or press Shift and Skip Forward
( ) on PMD-500D. A- will appear on the screen.
2. Set the desired ending point by pressing A-B on the remote control again, or press Shift and Skip
Forward ( ) on PMD-500D again. A-B will appear on the screen, and the loop will start and repeat
continuously.
3. To stop the loop, press A-B on the remote once more, or press Shift and Skip Forward (
PMD-500D once more. A-B will disappear from the screen, and playback will continue normally.
To jump to a specific track of the disc:
1. Use the number buttons (0–9) on the remote control to select the number of the desired track as a 2-
digit number. The desired track will start playing immediately.
To jump to a specific track or time of the disc:
1. Press GoTo on the remote control once to select Disc Go To. Use the number buttons (0–9) to enter
a 4-digit time to jump to from the total disc time.
2. Press GoTo a second time to select Track Go To. Use the number buttons (0–9) to enter a 4-digit
time to jump to from the current track.
3. Press GoTo a third time to select Select Track. Use the number buttons (0–9) to enter the desired
track as a 2-digit number to jump to that track. The track will start playing immediately.
4. To exit GoTo without making a selection, wait a few seconds until the pop-up disappears from the
display.
5. To jump to another location, repeat any Step 1–3.
12
/ ) will skip to the beginning of the current track only.
) on
) on