Bosch GWS Professional 1400 C Notice Originale page 9

OBJ_BUCH-348-010.book Page 9 Monday, November 7, 2016 8:51 AM
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The machine is intended for cutting, roughing and brushing of
metal and stone materials without the use of water.
For cutting with bonded abrasives, a special cutting guard
(accessory) must be used.
When cutting in stone, provide for sufficient dust extraction.
With approved sanding tools, the machine can be used for
sanding with sanding discs.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Release lever for protection guard
2 Spindle lock button
3 Thumbwheel for speed preselection
(GWS 11-125 CIE/GWS 14-125 CIE)
Technical Data
Angle Grinder
Article number
Rated power input
Output power
Rated speed
Speed control adjustment
Grinding disc diameter, max.
Thread of grinder spindle
Thread length (max.) of grinder spindle
Kickback stop
Restarting Protection
Reduced starting current
Constant electronic control
Speed preselection
Weight according to EPTA-Procedure
01:2014
– with vibration-damping auxiliary handle
– with standard-auxiliary handle
Protection class
Angle Grinder
Article number
Rated power input
Output power
Rated speed
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Bosch Power Tools
4 On/Off switch
5 Auxiliary handle (insulated gripping surface)
6 Grinder spindle
7 Extraction hood for sanding*
8 Mounting flange with O-ring
9 Carbide grinding head*
10 Clamping nut
11 Quick-clamping nut
12 Protection guard for grinding
13 Grinding wheel*
14 Protection guard for cutting*
15 Cutting disc*
16 Hand guard*
17 Rubber sanding plate*
18 Sanding sheet*
19 Round nut*
20 Cup brush*
21 Cutting guide with dust extraction protection guard *
22 Diamond cutting disc*
23 Handle (insulated gripping surface)
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
GWS ... 8-115 8-125
3 601 ... H20 ... H27 ...
W 800 800
W 500 500
-1
min 11000 11000
-1
min – –
mm 115 125
M 14 M 14
mm 22 22
– –
– –
– –
– –
– –
kg 1.9 1.9
kg 1.8 1.8
/II /II
GWS ... 1400 C 14-125 CI
3 601 ... H24 ... H24 ...
W 1400 1400
W 820 820
-1
min 11000 11000
English | 9
*
10-125 11-125 CI 11-125 CIE
H21 ... H22 ... H23 ...
1000 1100 1100
630 660 660
11000 11000 11000
– – 2800 – 11000
125 125 125
M 14 M 14 M 14
22 22 22
 
–
 
–
 
–
 
–

– –
2.1 2.0 2.0
2.0 1.9 1.9
/II /II /II
14-125 CIE 14-125 CIT 14-150 CI
H25 ... H29 ... H26 ...
1400 1400 1400
820 820 820
11000 9300 9300
1 609 92A 24C | (7.11.16)