4
4.1
c
4.1.1
c
0336078_CAWH_ENNLFR_V2.0, 15-05-2024
Use
Turn on the water heater
Caution
Make sure that the water heater is filled with water before you turn on the water heater.
Switch the isolator between the water heater and the mains power supply on to start the
water heater.
Select one of the 3 operating modes, use the scroll buttons.
•
Efficiency mode
•
Hybrid mode
•
Electric mode
Set the water temperature
Caution
Preferably set the temperature setpoint to 60 ºC. Harmful scaling and lime build–up will
be higher when you set the temperature setpoint to 65 ºC and higher. At lower
temperature settings there is a higher risk of high legionella concentrations in the water.
EN
25