Publicité
Les langues disponibles
Les langues disponibles
AV30
7b Valve Assembly
B
Attach angle stops to hot and cold
stub outs. Attach 1/2" supply hoses
to hot and cold supply stops.
Supply Hose, Cold
½" x 24"
Angled Supply Stop
⁵⁄₈" O.D. x ³⁄₈" O.D.
16
Supply Hose, Hot
½" x 24"
Attach wall adapter plug to power
jack on harness inlet on gang
D
valve bracket. Attach gang valve
to the wall. See Step 1a for valve
bracket anchor locations. Wall
adapter will plug directly into wall
outlet.
12/31/2021
For clarity, the front dryer
hose is not shown.
A
Loosen the compression nut. Push the faucet supply
tube firmly into the tube connector until it is seated.
Retighten the compression nut by hand.
Single Valve (TMA valve is shown. TL valve is similar.)
Valve,
Cold Supply
Bradley • 215-1771 Rev. L: ECO 21-08-042
Installation
C
Attach hot and cold
hoses to the valve.
Valve, Hot Supply
Publicité
