Publicité
Les langues disponibles
Les langues disponibles
Installation
Dryer Plenum Air Hose Assembly
5
The dryer hood is factory-installed. For
clarity, the basin, soap assembly and
faucet assembly are not shown.
Attach air hose from left upper
B
dryer plenum thru dryer hood
base opening and down to
lower dryer plenum.
A
Orient worm gears
to sides so that dryer
hood can be closed.
Bradley • 215-1771 Rev. K: ECO 21-08-042
Dryer Hood
Cover Tab
Dryer Hood
Base Pocket
Dryer Hood
Base Opening
C
Dryer Hood
Attach air hose from right upper dryer
plenum thru dryer hood base opening
and down to dryer motor assembly inlet.
To Reinstall the Dryer Hood Cover
A
B
12/31/2021
Remove Dryer
Hood Cover
Upper Dryer Plenum
Air Hose (Attached
by Bradley)
Remove (2) #10 x 1½"
A
screws (use
Hex
¹⁄₈"
Driver) and lift cover up
and back to remove.
Position the dryer hood
cover tabs into the dryer
hood base pockets.
Rotate cover down and secure
the cover to the base with the
two #10 x
" screws. Use ¹⁄₈"
³⁄₈
hex driver to remove screws.
AV30
13
Publicité
