Publicité
Les langues disponibles
Les langues disponibles
AV30
1b Backing Rough-In
Areas marked as
backing compliant with local building
codes. Anchor hardware is not provided.
For clarity, the motor assembly is not shown.
B
Secure the frame assembly to the wall at (4) locations marked "B"
using appropriate fasteners (1¼" square washers are provided). When
mounting is complete, check to ensure the frame assembly is level.
19"
(483mm)
17⁵⁄₈"
(448mm)
CODE
A
" Bowl Anchors with a Minimum Pull-Out Force of 1,000 lbs.
³⁄₈
B
" Frame Anchors with a Minimum Pull-Out Force of 1,000 lbs.
³⁄₈
VERTICAL HEIGHT ADJUSTMENTS FOR
RIM HEIGHT
34"
No Adjustment
31"
Subtract 3"
26"
Subtract 8"
10
require sufficient
(762mm)
⁵⁄₈" REF.
(16mm)
B
B
8¾"
(222mm)
DESCRIPTION
CODES A, B, H, C, D and E
12/31/2021
Remove white laser film from end caps
prior to installation of frame to wall.
30"
11¾"* REF.
(298mm)
A
A
B
B
15¾"
(400mm)
Finished
Floor
C L
ADA and TAS Standard
ADA and TAS Grades 6 thru 12 Juvenile
Junior
Bradley • 215-1771 Rev. L: ECO 21-08-042
A
Install wall anchors per
local codes at locations
shown below.
*See Step 2 before
drilling basin anchors
9½"
(241mm)
36¹⁄₈" REF.
27⁵⁄₈" REF.
(918mm)
(702mm)
20¾"
(527mm)
FIXTURE STYLE
Installation
QTY.
2
4
Publicité
