3d. Tighten the harness by pulling the strap (6), it should fit the child snugly.
4a. Once the child is securely strapped in, you can tilt the seat by pressing the lever (7) to the required position.
at the
Getting the child out of the seat
To get the child out of the seat, you should first place the seat in the loading position (2b).
3e. Loosen the harness straps by pressing the adjustment button.
uld be
3a. Then unfasten the buckle and get the child out.
Please make sure that the child gets out of the vehicle on the pavement side.
WARNING! The straps should never be twisted.
ment.
The harness buckle must be fastened correctly and the straps should fit the child snugly.
5) and
When use the seat in the rearward facing position, from 40-105 cm
4b. The seat should be fully reclined before rotate to rearward facing, only the position 4 is allowed.
st the
When use the seat in the forward facing position, from 76-125 cm
4c. Once the child is securely strapped in, you can recline the seat by pressing the button (7) to the required
des to
position, all the 4 positions are allowed.
at the
The insert cushion (19) is designed for use with new born babies to give them greater comfort and stability, and
4. RECLINING INSTRUCTION
5. USING THE ADAPTER
45