forward facing position).
2d. Press the button (8) again to place the car seat in the forward facing position. It is Important to check that the
seat is firmly locked into place.
Installing the seat in the forward facing position, from 105 cm to 125 cm
Storing the safety harness away
2e. Once the child has reached a height of 105 cm, the harness should be stored away and the child should be
secured with the vehicle safety belt.
To store the harness away it needs to be fully loosen first, lift the cover and store the buckle parts in the compartment.
Then put the cover back on the seat. Hiding the shoulder pad in the rear side of the upholstery.
2f. With the child placed in the seat put the vehicle seat belt on passing it through the upper guide (15) and
through the lower guide (16). Fasten the vehicle seat belt buckle and make sure the belt is not too loose.
Gently pulling the diagonal part of the belt before placing the belt over the child's chest.
This child restraint system has a loading position making it easy to place the child in the seat and adjust the
straps to fit correctly.
3a. Turn the seat to the loading position (2b) and open the harness (5). Move the harness straps to the sides to
place the child in the seat.
3b. Place the straps over the child and fasten the buckle.
3c. To adjust the headrest (2) pull the lever (1) on the top. It should be set to the right position, this means that the
shoulder harness should come out approximately l cm above the child's shoulders.
44
3. STRAPPING THE CHILD INTO THE SEAT
3d. Ti
4a. O
Gettin
To get
3e. Lo
3a. Th
Please
WARN
The h
When
4b. Th
When
4c. O
positio
The in