Inglesina HALLEY Manuel D'instructions page 42

1 Headrest adjustment handle
2 Headrest
3
Side protection system
4
Insert
5 5-point Safety Harness
6 Harness adjustment button
7
Recline button
8
Rotation button
9
ISOFIX connector arms
10 ISOFIX release button
To install the Halley child restraint system follow the steps below:
1a. Unfold the leg (12) until it is in the vertical position as shown.
1b. Move the button (11) to slide the ISOFIX (9) backwards unfolding the connector fully. Do this for both connectors.
1c. Guide the connectors towards the ISOFIX anchors in your vehicle until they lock together by clicking into place
and the indicator changes from red to green on both sides of the base.
1d. Move the seat backwards pressing the backrest against the vehicle seat. Then pull the safety seat towards you
42
INSTRUCTIONS
LIST OF COMPONENTS
11 ISOFIX connector arms extension paddle lever
12 Support leg
13 Support leg adjustment button
14 Support leg buffer stop
15 Upper belt guide
16 Lower belt guide
17 Plastic ISOFIX guides
18 ISOFIX Storage protector
19 Adapter
1. INSTALLING THE CHILD SEAT
to che
1e. Pr
not be
The vi
but no
ancho
To de
1f. M
Instal
2a. Pr
2b. Tu
forwa
2c. Pr
It is Im
Make
WARN
Instal
2a. Pr
2b. Tu