EIBENSTOCK EBS 125.4 RO Notice Originale page 24

Where the use of a dust extraction device is possible it shall be used.
To achieve a high level of dust collection, use industrial vacuum
cleaner (dust category M) for wood and/or minerals together with this
tool.
The work place must be well ventilated.
The use of a dust mask of filter class P2 is recommended.
According to our general terms of delivery for business dealings, suppliers
have to provide to companies a warranty period of 12 months for
redhibitory defects (to be documented by invoice or delivery note).
Damages due to natural wear, overstressing or improper handling are
excluded from this warranty.
Damages due to material defects or production faults shall be eliminated
free of charge by either repair or replacement.
Complaints will be accepted only if the tool is returned in non-dismantled
condition to the manufacturer or an authorized Eibenstock service centre.
Declaration of Conformity
We declare under our sole responsibility that the product described under
"Technical Data" is in conformity with the following standards or
standardization documents:
EN 60 745
according to the provisions of the directives 2011/65/EU, 2014/30/EU,
2006/42/EG
Technical file (2006/42/EC) at:
Elektrowerkzeuge GmbH Eibenstock
Auersbergstraße 10
D – 08309 Eibenstock
Lothar Lässig
General Manager
31.01.2018
Warranty
Frank Markert
Head of Engineering
24