Publicité
Removing Clogs
Hose
Tuyau
Manguera
Cover
(Suction Inlet)
Couvercle
(entrée
d'aspiration)
Cubierta
(Abertura de
aspiración)
Short Hose
Tuyau court
Manguera corta
Short Hose
Tuyau court
Manguera
corta
Hose Inlet
Entrée du tuyau
Conección de
manguera
The hose located on the back of the
vacuum cleaner carries the dirt from the
nozzle up to the dust bag. If the hose
should become clogged:
Unplug vacuum cleaner.
Pull open suction inlet cover and
check for clogging.
Disconnect wand from short hose
and check wand and hose.
Plug in vacuum cleaner and turn on.
Disconnect wand and stretch hose in
and out to remove clog.
If clog still exists, turn vacuum
cleaner OFF and UNPLUG POWER
CORD.
Remove lower plate.
Inspect inlet of short hose and clear
any obstructions.
- 38 -
Publicité
