Publicité
If a clog prevents the normal flow of air to the motor, the thermal protector turns the
motor off automatically to allow the motor to cool in order to prevent possible
damage to the vacuum cleaner.
During this time the headlight remains on.
To correct problem, turn off and unplug vacuum cleaner, remove clogs, and/or
clean/replace filters.
Replace full bag if necessary.
Wait approximately thirty (30) minutes, plug vacuum cleaner in, turn on to see if
thermal protector has reset. Thermal protector will not reset if vacuum cleaner is not
turned off even if vacuum cleaner cools down.
Thermal Protector
Edge Cleaning
BAG / HOSE CHECK INDICATOR
Edge cleaning feature enables
improved cleaning of carpets near
walls and furniture.
The BAG/ HOSE CHECK indicator
detects when dust bag needs
changing or the vacuum cleaner is
clogged.
Check dust bag when indicator
indicates FULL.
If dust bag is full, change bag
according to CHANGING DUST BAG
section.
If dust bag is not full, check for clogs
according to REMOVING CLOGS
section.
- 18 -
Publicité
