Care For The Environment - SCHOLTES SOHV1940 Manuel D'utilisation

To clean the exterior of the hood do not use either acid or basic products, or abrasive
sponges.
Clean the hood with a sponge dampen in warm water and a little quantity of neutral
detergent (for example dishwasher detergent), in order to remove possible particles of
grease.
Rinse with a damp cloth, removing all the detergent carefully, following the satin finish
direction on the steel surface. Drying is very important, especially in areas where water
is particularly hard and leaves limestone.
The hood features a LED light that, in addition to offering a good lighting and a
significant energy savings, are guaranteed to last on average 10 times more than
traditional lights. For replacement, contact the Assistance Service.

5. CARE FOR THE ENVIRONMENT

This appliance's packaging can be recycled. Recycle and contribute towards
protecting the environment by disposing of packaging in local waste containers
designed for this purpose. Your appliance also contains a lot of recyclable material.
This logo indicates that used appliances must not be mixed with other waste.
Appliance recycling organised by your manufacturer is carried out under
optimum conditions, in accordance with European Directive 2002/96/EC on
the disposal of waste electrical and electronic equipment.
Contact your local authority or retailer for information on used appliance collection
points close to your home.
Thank you for helping to protect the environment.
Information on the meaning of the conformity marking
The CE marking indicates that the product meets the main requirements of European
Directives 2014/35 / CE (Low Voltage), 2014/30 / CE (Electromagnetic Compatibility),
2011/65 / EU (Reduction of the use of certain dangerous substances in EEE).
The warranty does not cover wearing parts of the product, nor problems or
damage resulting from :
1. Surface deterioration due to normal wear and tear of the product;
2. Defects or deterioration due to contact of the product with liquids and due to
corrosion caused by rust or the presence of insects;
3. Any unauthorized incident, abuse, misuse, modification, disassembly or repair;
4. Any improper maintenance operation, use not in accordance with the instructions
concerning the product or connection to an incorrect voltage;
5. Any use of accessories not supplied or not approved by the manufacturer.
6. The warranty will be void if the product nameplate and / or serial number is removed.
29