Magnat CS 40 Mode D'emploi page 18

1.2 Rear
AC IN
•
SET ( RESET/ WPS Mode): Press briefly to activate WPS mode; press and hold for about 5 sec. to
restore the speaker to the factory settings.
•
AC main power adapter: Connect the power adapter to power on the system automatically.
•
AUX-IN: Audio input, 3.5mm stereo socket
•
LAN: Ethernet LAN connection to connect your speaker to a LAN port of a router instead of WLAN
network.
1.3 LED Status
Button/LED Displa
STANDBY in Red
AUX IN Lights up Orange
SET Flashes Green/Blue
Slowly
WLAN Flashes White
Lights up solid White
VOL -/+ Flashes
MUTE Flashes Slowly
2. NETWORK CONFIGURATION
The speaker is connected to the network via WLAN. The WLAN antenna on the speaker receives the
signals from the network router.
3. CONNECTING THE POWER SUPPLY
Please connect the AC Connection cable with your wall AC outlet socket.
AC IN SET AUX LAN
AUX IN
Desktop
Status
Standby mode after 15mins w/o any audio signal inputs
Connected via AUX IN
1. Reset to factory default
2. Firmware update
1. Booting process
2. WPS is processing
1. System is ready for WLAN connection
2. AP Mode
volume increase/decrease
Mute
Wi Fi
TV MP3/
Smart phone
18