Oceanic OCEALED40120B2 Guide D'utilisation page 78

Notes on recording and USB functions
- Information on the recording format: Recording is done in MPEG-TS format which
allows recording in HD quality identical to the signal received. To play your recordings on
another multimedia device, it may be necessary to install a compatible video codec.
- If you want to record a film or a long program, use a memory stick of larger capacity (eg.
4GB). If you want to save several films, opt for external hard drives of large capacity.
- The loading time of the USB device is too long: When you insert a USB support, the
loading time can sometimes be a minute or more. This depends on the size of your
support, the number of files on it and above all, the complexity of its directories. You can
reduce loading time by avoiding the use of multiple sub- directories in your USB disk.
Avoid such multiple-subdirectories like "Directory/Subdirectory/Sub-subdirectory/...." and
store files in a single simple directory.
USB Device Recognition Problems
- After connecting your USB device to the unit, you may need to turn the device on before
it can be detected.
- This unit does not support direct USB connection with computer. It is necessary for you
to transfer your data/files on a USB stick or MP3 player.
- If you are using an external hard drive to be connected via USB, you must connect the
hard drive simultaneously with a power source and with the unit. If you are using a
portable video player with hard drive, you must make sure that the internal battery is fully
charged.
- Verify that the file system of your USB device is properly formatted in FAT 32. USB
media formatted in NTFS is not compatible with this unit. Please refer to the manual of
your USB device to ensure that formatting is possible without altering its functionality.
- The USB device used may not be fully compatible with USB 2.0. In this case, try a
different USB stick in order to identify the problem.
Recording Quality
- If your recording is shaky or choppy The data stream to be recorded is very important.
Certain USB sticks, even some new USB 2.0 ones, do not allow sufficient data transfer
rate. If this happens, try with a newer USB device or with an external hard drive. With
external hard drives, data transfer rate is sufficiently high and this problem should be
solved.
EN-31