Oceanic OCEALED40120B2 Guide D'utilisation page 75

Immediate Recording
Insert a compatible USB device which has been previously formatted by the TV (please
refer to previous section). Wait for about 5 seconds until the device is recognized. Simply
press the REC button on the remote control in order to start immediate recording. Please
note this function allows recording of DVB-T channels only, other sources such as analog
TV will not be recorded.
If your device speed is not enough, there will be a dialog as follows:
You'd better change a high speed device or select "OK" to continue. Select "OK" to start
recording. You'll see the dialog:
During recording, the icon is displayed on the left.
Press REC again to set the recording time.
Use numeric keys to enter values and direction keys to move from a field to
another.
Press ■ on the remote control to stop recording.
To stop recording choose "OK", to continue recording choose "Cancel".
EN-28