Hilti SF 6-A22 Mode D'emploi page 16

4.1 Battery
Battery operating voltage
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
4.2 Accessory tools – permissible diameters
Ø range of keyless chuck
Ø range of keyless chuck
Ø wood drill bits (hardwood)
Ø wood drill bits (hardwood)
Ø wood drill bits (softwood)
Ø wood drill bits (softwood)
Ø drill bits for metal
Ø drill bits for metal
Ø drilling in concrete/masonry (hammer-action
drilling)
Ø drilling in concrete/masonry (hammer-action
drilling)
5 Operation
5.1 Inserting the battery
CAUTION
Risk of injury by short circuit or falling battery!
▶ Before inserting the battery, make sure that the contacts on the battery
and the contacts on the product are free of foreign matter.
▶ Make sure that the battery always engages correctly.
1. Charge the battery fully before using it for the first time.
2. Push the battery into the battery holder until it engages with an audible
click.
3. Check that the battery is seated securely.
10 English
Printed: 19.08.2019 | Doc-Nr: PUB / 5467429 / 000 / 01
21.6 V
1 ℉ ... 140 ℉
(−17 ℃ ... 60 ℃)
−4 ℉ ... 104 ℉
(−20 ℃ ... 40 ℃)
14 ℉ ... 113 ℉
(−10 ℃ ... 45 ℃)
1/16 in ... 1/2 in
1.5 mm ...
13 mm
1/16 in ... 3/4 in
1.5 mm ...
20 mm
1/16 in ...
1 1/4 in
1.5 mm ...
32 mm
1/16 in ... 1/2 in
1.5 mm ...
13 mm
5/32 in ... 1/2 in
4 mm ... 12 mm
2231427
*2231427*