Hilti SF 6-A22 Mode D'emploi page 12

Service
▶ Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power
tool is maintained.
▶ Never service damaged battery packs. Service of battery packs should
only be performed by the manufacturer or authorized service providers.
2.2 Drill safety warnings
Safety instructions for all operations
▶ Wear ear protectors when impact drilling. Exposure to noise can cause
hearing loss.
▶ Use the auxiliary handle(s). Loss of control can cause personal injury.
▶ Hold the power tool by insulated gripping surfaces, when performing
an operation where the cutting accessory or fasteners may contact
hidden wiring. Cutting accessory or fasteners contacting a "live" wire
may make exposed metal parts of the power tool "live" and could give
the operator an electric shock.
Safety instructions when using long drill bits
▶ Never operate at higher speed than the maximum speed rating of the
drill bit. At higher speeds, the bit is likely to bend if allowed to rotate
freely without contacting the workpiece, resulting in personal injury.
▶ Always start drilling at low speed and with the bit tip in contact with
the workpiece. At higher speeds, the bit is likely to bend if allowed to
rotate freely without contacting the workpiece, resulting in personal injury.
▶ Apply pressure only in direct line with the bit and do not apply
excessive pressure. Bits can bend causing breakage or loss of control,
resulting in personal injury.
Safety instructions for using mixing paddles or stirrers
▶ Switch the power tool on or off only when the mixing paddle is
immersed in the material for mixing. Failure to do so can cause a loss
of control with resultant risk of injury.
2.3 Additional safety precautions for screwdrivers
Personal safety
▶ Use the product only when it is in perfect working order.
▶ Never tamper with or modify the tool in any way.
▶ Use the auxiliary grips supplied with the power tool. Loss of control can
cause personal injury.
▶ Always hold the tool firmly with both hands on the grips provided. Keep
the grips clean and dry.
▶ Do not touch rotating parts – risk of injury!
▶ Wear suitable protective glasses, a hard hat, ear protection, protective
gloves and light respiratory protection while using the power tool.
6 English
Printed: 19.08.2019 | Doc-Nr: PUB / 5467429 / 000 / 01
2231427
*2231427*