Hilti SF 6-A22 Mode D'emploi page 14

3 Description
3.1 Overview 1
Keyless chuck
@
Torque and operating mode
;
selector ring
Side handle
=
Gear selector switch
%
Forward/reverse selector
&
switch with safety lock
Control switch (with electronic
(
speed control)
3.2 Intended use
The product described is a hand-held cordless drill/driver. It is designed for
drilling in steel, wood, plastic, cellular concrete and masonry and for driving
and removing screws.
▶ Use only Hilti Li­ion batteries of the B 22 series with this product.
▶ Use only the Hilti battery chargers of the C4/36 series to charge these
batteries.
3.3 Items supplied
Drill / driver, side handle, operating instructions.
Other system products approved for use with this product can be found at
your local Hilti Store or online at: www.hilti.group | USA: www.hilti.com
3.4 Lithium­ion battery status display
The Li-ion battery state of charge and malfunctions of the power tool are
indicated by the display on the Li­ion battery. The Li­ion battery state of
charge is displayed after pressing one of the two battery release buttons.
Status
4 LEDs light.
3 LEDs light.
2 LEDs light.
1 LED lights.
1 LED blinks.
1 LED flashes, the power tool is not
in working order.
4 LEDs flash, the power tool is not
in working order.
8 English
Printed: 19.08.2019 | Doc-Nr: PUB / 5467429 / 000 / 01
Grip
)
Light to illuminate the work
+
area
Belt hook (optional)
§
Charge-status and fault indi-
/
cator (Li-ion battery)
Battery release button
:
Battery
∙
Meaning
State of charge: 75 % to 100 %
State of charge: 50 % to 75 %
State of charge: 25 % to 50 %
State of charge: 10 % to 25 %
State of charge: < 10 %
The battery has overheated or is
completely discharged.
The power tool is overloaded or has
overheated.
2231427
*2231427*