Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY
The generator requires some assembly prior to
usage. If problems arise when assembling the
generator, call 1-844-347-6261.
Install the Wheel Kit
CAUTION
The wheel kit is not intended for over-the-road
use.
C
D
1. Before adding wheels, tip the generator on
its side.
2. Slide the axle pin A through the wheel B.
3. Slide the axle pin A through the mount point
on the frame and flat washer D.
4. Secure the wheel and axle pin with the cotter
pin C.
5. Repeat steps 2-4 to attach another wheel.
English
Install the Support Leg
1. Attach the rubber support (H) to the support
2. Attach the support leg (G) to the generator
3. Tip the generator slowly so that it rests on the
4. Tighten bolt E and nut F with provide wrenches.
B
A
Page 08
leg (G) with flange bolt (I) (M6X25) and flange
lock nut(J) (M6).
frame with flange bolt (E) (M8X16) and flange
lock nut(F) (M8).
wheels and support leg.
Customer Service: 1-844-FIRMAN1
Publicité
