Publicité
Les langues disponibles
Les langues disponibles
5
Cleaning
4. Place a sufficient large container under the coffee spout.
5. In standby condition, press and hold
for 5 seconds. A beep sound will be heard with
espresso button
6. Press strong espresso button to confirm undergoing the self-cleaning
process. To resume back to the standby condition, press .
7. will be flashing indicates that the appliance is undergoing the self-
cleaning process.
WARNING: Keep skin/body away from the hot water.
8. When all the water in the water tank is being dispensed out,
strong espresso button
solution in the water tank and fill the tank with normal tap water until
the max position. When water is filled into the water tank,
off. Then the appliance will continue the self-cleaning process.
9. When the self-cleaning process is completed, the appliance will
switch off automatically.
5.3 Empty System Function
The empty system function is recommended to be used before long period
of non-use, frost protection and before talking to repair agent.
1. In standby condition, press and hold the
together for 5 seconds.
2.
will then be flashing.
3. Remove the water tank from the appliance.
indicates that the empty system is under process. You can press
before removing the water tank to resume back to the standby condition.
Fully Automatic Coffee Maker / User Manual
will be flashing.
will be flashing. Remove all the remaining
and strong espresso button
and mild espresso button
will light up stably
and strong
and
will goes
25 / EN
Publicité
