Publicité
Les langues disponibles
Les langues disponibles
3
Preparation
3.2 Filing the water tank
About the protect program: If the water tank is not
fully placed into the machine, a protection mode will be acti-
vated in 15 seconds during brewing process. Hot water button
will lights on control panel.
1. Make sure that the water tank is fully inserted into the ma-
chine.
2. Press the hot water button. After the hot water is dis-
pensed, the machine will be in standby condition.
WARNING: When
ter level and requires filling the water tank.
Lift the water tank by using
the lid as the handle.
To prevent overflow of water from the water tank, do not add
water directly into the appliance with another container.
Fully Automatic Coffee Maker / User Manual
is flashing, the water tank is in low wa-
Take the water tank out.
Rinse the water tank with
fresh water and then fill the
tank to the Max level and pla-
ce it back into the machine.
Make sure it is fully inserted.
15 / EN
Publicité
