Multimetrix DMM 230 Notice De Fonctionnement page 23

Chapter II
1.1.5 Cleaning
Disconnect external circuit leads and turn off the instrument. Clean with
a damp cloth and soap. Never use abrasive products or solvents.
Make sure the instrument is perfectly dry before using it again.
1.16 Protection factor (PF)/Humid Environment
This instrument has a PF67 protection factor, which means that it is
extremely waterproof and will not be damaged by water immersion
(when turned off).
However, the instrument and its accessories must be completely dry
(including inside measurement terminals) before being used again.
1.2 Guarantee
This equipment is guaranteed against any material or manufacturing
flaws, as specified in the general terms of sale.
During the guarantee period (1 year), the instrument can only be
repaired by the manufacturer, who reserves the right to repair the
instrument or to exchange all or part of it. If the equipment is returned to
the manufacturer, the outgoing transport costs are borne by the
customer.
The guarantee is not applicable in the following cases:
1. improper use of the equipment or use in conjunction with
incompatible equipment;
2. modifications to the equipment without the explicit authorisation of
the manufacturer's technical department;
3. work carried out on the instrument by a person not approved by the
manufacturer;
4. adaptation for a specific application, not included in user's manual
5. knocks, falls or prolonged immersion.
1.3 Maintenance
Return your instrument to your distributor for any work to be done within
or outside of the guarantee.
1.4 Unpacking - Repacking
The equipment underwent thorough mechanical and electronic testing
before shipment. All necessary precautions were taken to ensure that
you receive the instrument in good condition. We recommend you
check the equipment quickly on delivery to detect any damage that may
have occurred during transport. If there is any damage, inform the
carrier immediately. If you ship this instrument on elsewhere, it is
preferable to use the original packaging and indicate the reasons for
reshipment as clearly as possible in a note enclosed with the
equipment.
DMM230 21