CLAS BLINE OM 9100BL Mode D'emploi page 5

OM 9100BL
SPECIFICATIONS
This kit enables you to remove the injector seal, clean the wells and rebuild the injector seats on diesel
engines.
COMPOSITION
1
2
3
4
5
6
7
8
9
10
PRECAUTIONS
Risk of burns when working on a hot engine;
• Make sure there is no pressure in the injector feed pipes, as there is a risk of fire and personal injury;
• Wear safety goggles and gloves when disassembling injectors and cleaning;
• Refer to the vehicle's workshop manual and follow the disassembly and reassembly instructions to
avoid engine damage;
• Any foreign matter that has mistakenly entered the combustion chamber must be removed before
starting the engine, to avoid irreversible engine damage;
• Switch off the ignition and disconnect the battery before starting the engine.
INJECTOR SEAT CLEANING KIT
8
Injector seat cutter holder
Gasket extractor
Brush holder extension
Brushes for injection holes
Brushes for injector wells
Mounting/dismounting rod Cleaning plugs
Cleaning plugs
Brush holder
Injector seat cutter guide cones
Injector seat cutter
1
3
4
5
7
10
2
6
9