Seat Width (Wheelchair Specifi C); Seat Depth (Wheelchair Specifi C) - Handicare NUAGE PLS Manuel D'utilisation

16 Settings (by a professional)
5.9 Seat width (wheelchair
specifi c)
The distance between the seat shells edges
(T) and the required seat width relate as
(T) = (U) + 12 cm.
Rough adjustment
When mounting the seat, choose the screw
hole pattern that fi ts the required seat width
range: 30 to 40 cm, 40 to 50 cm or over 50 cm.
Finetuning
Further adjustment of the seat width for a
specifi c user takes place during a fi tting
session.
1. Remove the straps on one side by
detaching the velcro ends from the velcro
surfaces on the seat shells.
2. Loosen (V) on both sides.
3. Move the armrest holder (W) inwards or
outwards on both sides.
4. Fasten (V) on both sides.
5. Tension the straps and attach the velcro
ends to the velcro surfaces of the seat
shells.
5.10 Seat depth (wheelchair
specifi c)
1. Loosen (X) on both sides.
2. Slide (Y) to the front or back to create the
required seat depth.
3. Fasten (X) on both sides.
U
T
1
3
W
2
Y
Nuage
19
20
V
21
1 X
3
2