14
Settings (by a professional)
5.4 Contour cushion
Optionally the front straps can be replaced with
a separately availabe contour cushion.
1. Remove the front four webbing straps (I).
2. Place the contour cushion (J).
5.5 Backrest webbing
The six adjustable straps and one simple strap
(Nuage PLS Active XS: fi ve adjustable straps)
enable to follow the contours of the back, create
a lumbal support and give further extra support
where needed.
1. Place a simple webbing strap in the upper
recesses (K).
2. Tension strap and fasten the velcro ends.
3. Place adjustable webbing straps in recesses
(L), (M) and / or if required over the entire
edge (N).
4. Tension adjustable straps and fasten the
velcro ends.
5. Tension further with the sliding buckles.
5.6 Dorsal obliquity
1. Use the sliding buckles and move the velcro
ends to create a different (asymmetrical)
support left and right.
J
M
XS
N
N
Nuage
13
2
I
1
14
K
L
M
L
15