Télécharger Imprimer la page

Philips LatteGo 3200 Seire Mode D'emploi page 21

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 109
Mandatory firmware updates are started automatically when the coffee machine is in stand-by
mode. Optional firmware updates must be initiated via the Coffee+ app. A Firmware update can take
at least 1 minute and during this time the Wi-Fi light flashes and the coffee machine cannot be used.
Device compatibility
For detailed information about the compatibility of the app, please refer to the information in the App
Store or on Google Play.
Troubleshooting
This chapter summarizes the most common problems you could encounter with the machine. Support
videos and a complete list of frequently asked questions are available on www.philips.com/coffee-
care. If you are unable to solve the problem, contact the Consumer Care Center in your country. For
contact details, see the warranty leaflet.
Icons
Icon
Solution
The Wi-Fi light is off
-
The coffee machine is not connected to your home Wi-Fi (no initial Wi-Fi set-up
done so far)
-
The connection to your home Wi-Fi is lost e.g. because the home router has
changed or the distance between the coffee machine and router is too big.
The Wi-Fi light is on
Pairing with the Coffee+ app is complete and the coffee machine is connected to the
home Wi-Fi.
The WI-FI light is flashing
-
The coffee machine is in the setup mode during the Wi-Fi setup process. The
buttons on the coffee machine are inactive.
-
In case the machine was already connected, the flashing light is an indication
that the coffee machine is in the process of connecting to the home Wi-Fi.
-
In case the machine is connected to the Wi-Fi network, the slow flashing light is
an indication that the coffee machine is updating the firmware. This update can
take at least 1 minute and during this time the coffee machine cannot be used.
The 'water tank empty'/'empty coffee grounds container' light is flashing
-
The water tank is almost empty. Fill the water tank with fresh water to the
maximum level indication.
-
The water tank is not in place. Place back the water tank.
-
The coffee grounds container is full. Remove and empty the coffee grounds
container while the machine is switched on. Wait at least 5 seconds before you
reinsert the container.
English
21

Publicité

loading