Publicité
Les langues disponibles
Les langues disponibles
2
Turn the M.C. dial to select [RECENTS] or [PHONE BOOK], then press to
confirm.
If you select [PHONE BOOK], proceed to step 4.
3
Turn the M.C. dial to select [MISSED], [DIALED] or [RECEIVED], then press
to confirm.
4
Turn the M.C. dial to select a name or phone number, then press to
confirm.
The phone call starts.
To answer an incoming call
1
Press
when a call is received.
TIP
When two phones are connected to the unit via Bluetooth and there is an incoming call
while one phone is being used for a call, a message will appear in the display. To answer that
incoming call, you need to end the existing call.
Basic operations
Purpose
Operation
End a call
Press
Reject an incoming call
Press and hold
Switch between the current
Press the M.C. dial.
caller and a caller on hold
Cancel a caller on hold
Press and hold
Adjust the volume of the
Turn the M.C. dial during the call.
caller's voice (When private
mode is on, this function is not
available.)
Turn the privacy mode on or
Press BAND/
off
.
when a call is received.
.
during the call.
To preset phone numbers
1
Select a phone number from a phone book or call history.
2
Press and hold one of the number buttons (1/
The contact is stored in the selected preset number.
To make a call using a preset number, press one of the number buttons (1/
to 6/
), then press the M.C. dial.
Voice recognition (Only for iPhone)
This function is only available when an iPhone equipped with voice
recognition is connected to the unit via Bluetooth.
1
Press and hold
to activate the voice recognition mode.
2
Press the M.C. dial and then talk into the microphone to input voice
commands.
To exit the voice recognition mode, press BAND/
NOTE
For details on the voice recognition features, refer to the manual supplied with your iPhone.
Phone menu
Menu Item
Description
RECENTS
Display the missed call history.
[MISSED]
[DIALED]
Display the dialed call history.
[RECEIVED]
Display the received call history.
PHONE BOOK*1
Display the contacts which have been transferred from
your phone. Set [VISIBLE] in the Bluetooth settings to
[ON] to browse the contacts via this unit.
PRESET 1-6
Recall the preset phone numbers. You can also recall the
preset phone numbers by pressing one of the number
buttons (1/
to 6/
).
.
to 6/
).
11
En
Publicité
