HQ Power VDP2000SMT Mode D'emploi page 6

DMX Chain with Terminator

A DMX terminator is recommended for installations where the DMX cable has to run a long distance or used
in an electrically noisy environment (e.g. discos). The terminator prevents corruption of the digital control
signal by electrical noise. The DMX terminator is simply an XLR plug with a 120 Ω resistor between pins 2
and 3, which is then plugged into the XLR output socket of the last device in the chain.
8. Cleaning and Maintenance

All screws should be tightened and free of corrosion.

The housing, visible parts, mounting supports and the installation location (e.g. ceiling, suspension,
trussing) should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting
supports, do not change the location of the connections.

Moving mechanic parts must not show any signs of wear and tear.

The electric power supply cables must not show any damage. Have a qualified technician maintain the
device.

Disconnect the device from the mains prior to maintenance activities.

Clean the device regularly by running it with a mixture of 20 % vinegar and 80 % distilled water after each
40 hours of running.

Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.

There are no user-serviceable parts, apart from the fuse.

Contact your dealer for spare parts if necessary.
Replacing the Fuse
Only replace the fuse by a fuse of the same type and rating.
1. Before replacing the fuse, switch off the device and unplug the mains lead.
2. Unscrew the fuse holder with the appropriate screwdriver.
3. Remove the old fuse and install the new fuse in the fuse holder.
4. Replace the fuse holder in the housing and tighten it.
9. Technical Specifications
power supply
power consumption
warm-up time
smoke output
tank capacity
dimensions
weight
Use this device with original accessories only. Velleman nv cannot be held responsible in the event
of damage or injury resulting from (incorrect) use of this device. For more info concerning this
product and the latest version of this manual, please visit our website www.hqpower.eu. The
information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this
manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the
prior written consent of the copyright holder.
V. 01 – 06/03/2015
VDP2000SMT
230 V~, 50 Hz
2000 W
2.5 min.
± 560 m³/min.
1.9 L
430 x 305 x 200 mm
6.5 kg
6 ©Velleman nv