Publicité
Les langues disponibles
Les langues disponibles
Active AX
|
Maintenance and troubleshooting
3.4.3
Washing
⚠ Wa r n ing
Risk of food poisoning from washing at low tempera-
ture
During heating, one of the cycle icons is lit and it is also possi-
ble to start the wash cycle, even if the setpoint temperatures re-
quired for correct sanitisation of the items have not been
reached.
– Sammic advises against carrying out washing cycles if the icon
is not lit.
1)
Press the START button
machine.
– To move to the next phase of the wash cycle, press START
cessively.
– If the Thermal lock function is active, the machine does NOT respond
to the button being pressed.
– If the door is opened, the machine pauses the cycle and the
icon
comes on.
–
[Models with drain pump]
The icon
phase after the rinsing process.
⚠ Ca ut io n
Risk of irritation from splashes
If you open the door or dome in the middle of the cycle, the ma-
chine may spray soapy water at high temperature and, if it
comes into contact with the skin or mucous membranes, it may
cause irritation.
– Do not open the door or dome in the middle of the cycle.
2)
During the wash phase, the icon
3)
During the rinse phase, the icon
4)
When the wash cycle ends, the two icons
simultaneously.
⚠ Ca ut io n
Risk of irritation from high temperature water vapour
After the end of the wash cycle, when you open the door or
dome of the dishwasher, a large amount of steam comes out at
high temperature and may irritate the skin or eyes. The items
may be at high temperature and cause minor skin irrita-
tion/burns.
– When opening the door or dome of the machine, avoid bringing
your face close to the machine.
– If steam gets on your face, wash your face with cool water.
– Wait a reasonable amount of time before removing items from
the dishwasher.
5)
Open the door or dome and remove the basket from the dish-
washer.
8
to start the wash cycle in the
suc-
flashes during the drainage
flashes.
flashes.
and
flash
6)
If you want to wash more baskets, repeat the process from step
3.4.1-1).
⭆
If the PROG
or START button
hours, the machine switches off automatically.
4
Maintenance and troubleshooting
Fig. 3: Machine filters
1 Surface filters
2 Overflow
3 Collector filter
4.1
Safety information
•
Risk of scalding with the water in the tank: the water in the tank
is at a temperature of approx. 60 °C.
⇒
Do not put your hands in the tank for a prolonged period of
time.
⇒
When emptying or cleaning the tank manually, wear water-
proof rubber gloves.
•
Risk of burns with the heating element: the surface of the heat-
ing element is subject to residual heat after use.
⇒
Avoid placing your hands close to the heating element after
using the machine.
is not pressed within 2.5
1
2
3
4
5
6
4 Suction filter
5 Drain filter
6 Collector
User's manual — 2900453/2
Publicité
