AKO 15645 Guide Rapide page 18

4.- Description
Stand-by active mode
Change of the Set Point active
Continuous cycle active
Cold room light active
Alarm active
Display
Browser
Escape key
Light key
Safety cover
Circuit breaker
(Only AKO-15645 /
AKO-15646)
* If pump down is active, it indicates the operation of the compressor.
** If pump down is active, it indicates that the solenoid is open, otherwise it indicates that the compressor is in operation.
4.1.- Quick access to functions
Pressing it for 5 seconds activates or
SET
deactivates the defrost.
If probe 1 is displayed by default, the value
SET
of probe 2 will be displayed by pressing and
vice versa. (see parameter P8)
Pressing it for 5 seconds, the quick setup
SET
menu is accessed.
Silences the alarms (they are indicated on the
ESC
display).***
Pressing it for 5 seconds activates or
deactivates the Stand-By mode. The display
shows the m symbol in this mode.
*** The trapped person alarm (button AKO-520622) cannot be silenced.
Temperature
Defrosting in progress
Fans active
Compressor active*
Compressor or solenoid active**
Only AKO-15648
Pressing it for 5 seconds allows changing the
SET
SET POINT temperature.
Pressing it for 5 seconds, activates or deacti-
SET
vates the CONTINUOUS CYCLE.
Pressing it for 10 seconds, the advanced setup
SET
menu is accessed.
Pressing it for 2 seconds, activates or deacti-
vates the cold room light (if P6 or P62=1). This
function stays active although the unit is in the
m mode.
18
Pushbutton
Only AKO-15627 /
AKO-15646
Defrosting thermal protector
Manoeuvring thermal protector