Troubleshooting
Problem
The control panel does not react
when pressed.
Cannot close door.
30
Possible causes
You have pressed the control
panel too soon after opening the
door.
Child lock or Automatic child
lock is activated.
The door is closed.
Dirt on the control panel.
The control panel requires
calibration.
The baskets are not correctly
positioned.
The door lock does not click into
place and lock.
Action
Wait a moment then try again.
See the chapter Safety
instructions.
Open the door. The control
panel only reacts to use when
the door is open.
Clean with a dry or slightly damp
cloth.
Turn off the water tap. Remove
the plug from the wall socket
and wait for 60 seconds. Then
plug the appliance back into the
wall socket and turn on the
water tap.
Check that the baskets are
correctly positioned horizontally.
Check that the dishes are not
blocking the baskets from
sliding properly into place.
Check the door lock. If it does
not click into place and lock,
open the door.
Press and hold
until the display starts flashing.
Wait until it stops flashing (60
seconds). Close the door.
Check that the door lock clicks
into place and locks.
and