Télécharger Imprimer la page

ETNA KVO682/E01 Manuel D'utilisation page 42

Publicité

Les langues disponibles

Les langues disponibles

OPERATION
Switching on and off
When the appliance is connected to the power supply, the display will show '- -'. If you do not
touch any key within 1 minute, the display will switch off.
1. Touch the On/Off key for three seconds.
The set temperature is displayed; the refrigerator is switched on.
2. Touch the On/Off key for three seconds again to switch off the refrigerator.
Setting the temperature
1. Touch (several times) the temperature key to set the temperature of the refrigerator
compartment.
The temperature of the refrigerator compartment can be set to between +2 °C and +8 °C.
The recommended temperature of the refrigerator compartment is 4 °C (default setting).
At this setting, the temperature in the freezer compartment will be approximately -18 °C.
After you have switched on the appliance it will take several hours for the temperature to
decrease to the set temperature. Do not put food into the appliance until the temperature
has decreased to the set temperature.
Set a lower temperature if the ambient temparature is less than 16 °C.
Intensive freezing (FastFreeze)
This appliance has an intensive freezing function. This function decreases the temperature in
the freezer compartment as quickly as possible. Activate this function 24 hours before you put a
large quantity of fresh food in the appliance.
When the intensive freezing function is selected, the appliance works at maximum
capacity. It may then make more noise for a while.
When the function is active, the temperature in both the refrigerator compartment and
the freezer compartment is lower.
EN 16

Publicité

loading

Ce manuel est également adapté pour:

Kvo682