Hesperide PARADIZE 196987B Mode D'emploi page 5

1/ Your product
EN
Properties
Aluminium is a light, resistant material that doesn't rust.
Acacia is a hardwearing exotic wood covered with a protective oil.
To begin with it presents a golden brown sheen but it turns to a grey/green tone when
exposed to bad weather and UV rays. It nonetheless retains its properties.
Polyester is a synthetic fabric that offers good resistance to tearing and rubbing.
Manufacturing and assembly
The manufacturing then assembly of this product requires leaving clearance between
the different parts.
It is therefore normal to observe gaps/slack that may reach several millimetres
between the different assembled elements (between two slats, between boards...).
This tolerance necessary for the correct realisation of your product can be behind little
geometric differences.
This does not lead to any loss of function of your product.
Irregular appearance
Each product is manufactured and assembled industrially from parts whose surface
treatment is carried out individually, before assembly. These metallic elements cannot
be free from appearance irregularities coming both from the surface treatment
process and assembly operations. The final appearance of the product is therefore
directly linked to these possible irregularities.
Regularity of seams
Although we pay special attention to the quality and regularity of seams, it is possible
to notice that some threads are not cut after the break point of the seam. There is no
risk of the seam becoming undone. Cut this thread with a simple pair of scissors.
2/ Precautions for use
Before using this chair for the first time, we recommend that you thoroughly clean the
various elements with a cloth dampened in soapy water, then apply a thin layer of
protective oil, allow to dry in the shade before wiping with a clean cloth excess oil that
would not have penetrated the wood. Start again after 48 hours. There is no need to
switch your furniture to sandpaper.
We do not recommend the use of a stain or varnish which forms a surface layer and
prevents the wood from breathing. It is preferable to apply an oil which will deeply
impregnate the wood.
Be careful, wood is a living material: it may release tannins during the first days of use.
We therefore recommend installing the product first directly on the lawn, until the
wood no longer releases tannins. If you were to put it on a hard terrace, be sure to
leave wedges under your feet for a few days. If in spite of everything, tannins come to
soil your terrace, get to a specialize store to choose the cleaning product most suited
to your type of terrace. But be aware that it is possible to clean the traces of tannins
even on the most porous materials, with a high pressure jet.
Do not put hot objects on the table itself, they will leave permanent marks on it (disco-
loration, deformation, cracks...). Always use table mats.