Publicité
Les langues disponibles
Les langues disponibles
Authorized KICKER Dealer:
Purchase Date:
Model Number:
Serial Number:
PERFORMANCE
Model:
RMS Power
@ 14.4V, 4Ω mono, 1% THD+N
@ 14.4V, 2Ω mono, 1% THD+N
Length
Height
Width
Frequency Response ± 1dB
Signal-to-noise Ratio
Input Sensitivity
Selectable Electronic Crossover
Bass Boost
Subsonic Filter
Maximum Effi ciency (2Ω)
Pro Tip: To get the best performance from your new KICKER Amplifi er and extend the warranty by 1 year, use
genuine KICKER accessories and wiring.
INSTALLATION
Mounting: Choose a structurally sound location to mount your KICKER amplifi er. Make sure there are no items
behind the area where the screws will be driven. Choose a location that allows at least 4" (10cm) of open
ventilation for the amplifi er. If possible, mount the amplifi er in the climate-controlled passenger compartment.
Drill four holes using a 7/64" (3mm) bit and use the supplied #8 screws to mount the amplifi er. Use the IXSM
mounting bracket (sold separately) to stack IX amplifi ers of different sizes.
2
2010 IX 500.1 1000.1 RevC.indd 2
2010 IX 500.1 1000.1 RevC.indd 2
All manuals and user guides at all-guides.com
IX.1-SERIES AMPLIFIERS Owner's Manual
IX500.1 / IX1000.1
IX500.1
275W x 1
500W x 1
9-3/8" (238mm)
2-3/16" (55mm)
7-7/8" (200mm)
25Hz–200Hz
95dB, A-weighted, re: rated power
Low Level: 125mV–5V
High Level: 250mV–10V
Variable lo-pass 50–200Hz, 24dB/octave
Variable 0–18dB @ 40Hz
24dB/octave, fi xed @ 25Hz
>80%
IX AMPLIFIERS
IX1000.1
550W x 1
1000W x 1
11/12/2009 2:15:06 PM
11/12/2009 2:15:06 PM
Publicité
