Item
Delay indicator - 6 hours
Delay indicator - 3 hours
PROGRAMS
Icon
Name
P1 - Intensive
P2 - Eco
P3 - Quick '90
90
P4 - Quick '30
Note:
The eco program is suitable to clean normally soiled dishes. It is the most efficient program because of
the combined energy and water consumption and it complies with the EU ecodesign legislation.
5
Operation
PREPARING FOR OPERATION
1. Do a check if the electricity and the water supply connections of the appliance match the values indicated in the
installation instructions.
2. Remove all packaging material inside the appliance.
3. Fill the salt reservoir. Refer to section
4. Fill the rinse aid reservoir. Refer to section
FILLING THE SALT RESERVOIR
For a good result the appliance needs soft (less calcareous) water. Salt is used to soften the water and it prevents
white lime residues on your dishes and the interior of the appliance.
Caution:
Only use salt that is suitable for a dishwasher. Do not use table salt.
Note:
Fill the salt reservoir when the salt indicator on the control panel is on.
1. Remove the lower basket.
2. Turn the cap (A) of the salt reservoir counter-clockwise to remove it.
Function
To show that the start time of a program is delayed for 6
hours.
To show that the start time of a program is delayed for 3
hours.
Description
Program for heavily soiled dishes.
Daily program for normally soiled dishes. The program
takes longer, but uses less water and slowly heats for
lower energy consumption.
Short program for normally soiled dishes.
Short program for lightly soiled dishes, such as cups and
glasses.
'Filling the salt reservoir'
.
'Filling the rinse aid reservoir'
.
English
Time
[min.]
205
230
90
30
(Figure 3)
•
37