Télécharger Imprimer la page

Krups BLENDER PERFECT MIX KB403 Mode D'emploi page 19

Masquer les pouces Voir aussi pour BLENDER PERFECT MIX KB403:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
Cold carrot soup:
600g carrots + 900g water : Put the carrot pieces in the blender jug and add the water. Mix
on max speed for 3 minutes.
Mixed figs (with mini chopper accessory (N), depending on model)
70g figs : Put figs in mini chopper (N). Mix on max speed for 3 seconds.
Do not immerse the appliance in water. Never put the motor unit (A) under running water.
„ Clean the jug immediately after use.
„ Fill up the jug with 1 litre of hot water along with 2 or 3 drops of washing up liquid. Only
use the recommended amount of water and washing up liquid. An excess of washing up
liquid creates more foam and consequently can lead to overflowing.
„ Use the automatic auto clean program to carry out a prewash of the jug.
„ Once the program has stopped, unplug the appliance.
„ Remove the blender jug (F4)
„ Place the jug on a flat surface.
„ Unlock the lid and remove it with care. Pour out the water.
„ Remove the blade unit (F1+F3) and clean them under running water. The blades are very
sharp, handle them with caution to avoid injury (Fig. 10).
„ After cleaning, remember to correctly fit the seal (F3) back onto the blade unit (F1)
(Fig.  11). Please be careful to avoid any damage to the seal by touching the blades.
Note: Incorrectly fitting the seal can result in ingredients leaking from the base of the
blender jug.
„ Finish cleaning the jug with a damp cloth or sponge.
„ Rinse the inside of the jug and the lid under running water.
„ Take care when cleaning the blades in the blender jug and when you empty the jug as
they are sharp.
„ Use a damp cloth to clean the motor unit (A). Dry it carefully.
„ The detachable parts (lid, blade unit, locking ring,) can be cleaned with a sponge and hot
soapy water.
„ The jug (F4), blade unit (F1) (but not the seal (F3)), locking ring (F2) can be cleaned in the
dishwasher on the upper rack - use the 'ECO' or 'LOW SALT' program.
„ Caution: The jug (F4), blade unit (F1) and locking ring (F2) must be disassembled and
placed separately in the dishwasher. Please do not put the seal (F3) in the dishwasher.
RECIPE
CLEANING
10
11
16

Publicité

loading