Sanyo KHS1872 Mode D'emploi page 19

3. How to set the ON time
4. How to set DAILY ON/OFF
REPEAT timer
To cancel a timer program
OI-801-19EG
All manuals and user guides at all-guides.com
Setting the Timer (continued)
(Example) To start operation at 7:10 am.
Operation
1. Press the ON TIME setting
button once.
2. Press the Advance, Return ( ,
) button until AM 7:10 is
displayed.
3. Wait a few seconds, and then
the setting is complete.
(Example) To start operation at 7:10 am. and stop the air conditioner at 11:00 am.
Present time
1. Set the timer ON/OFF times as
shown in 2-1, 2, 3 and 3-1, 2, 3.
• The ON/OFF combination timer uses the current time as
NOTE
• With the ON/OFF combination timer, the settings are
• You can check the timer ON/OFF times after you have set
• Press the CANCEL button.
• When either an ON or OFF timer is to be canceled, press the button
corresponding to the timer whose program is to be canceled, and then press
the CANCEL button.
• The airflow direction, fan speed and temperature setting can be changed after
NOTE
a timer program has been set even when the unit is stopped. Even when
operation is stopped during an ON timer program, the unit will start operating
when the set time is reached provided that the program is not canceled.
• When the ON timer and OFF timer are set to the same time, the timer
operates as if it is turned off.
The timer
displayed, and the present ON time
is shown.
The timer
The time can be set in 10-minute
increments. Holding down the
button advances the time rapidly in
10-minute increments.
The timer
blinking and the present time is
displayed.
10:30 pm.
7:10 am.
ON
The present time 10:30 pm. and
the reference, and it is activated starting from whichever
set time comes first.
repeated every day.
them by pressing the ON TIME and OFF TIME setting
buttons.
Indication
indication is
indication blinks.
indication stops
11:00 am.
OFF
are displayed.
19