Tineco CARPET ONE Serie Mode D'emploi page 30

MAX Mode
• In AUTO mode, press the
MAX mode. The AUTO indicator on the display
will turn off.
• The iLoop only displays the dirty amount, and
the spray volume keeps at the maximum of
"100".
• In MAX mode, the appliance will apply max
spray volume.
Fig.C-9
DRY Mode
• In MAX mode, press the
DRY mode. In DRY mode, the dryness indicator
will change with the humidity detected by the
humidity sensor.
• Press the button to switch to AUTO mode.
Fig.C-10
ACCESSORY Mode
• Ensure the appliance is powered on (if not,
press the button), the appliance will enter
ACCESSORY mode. Press and hold the button
on the 2 in 1 Nozzle to spray water, and release
the button to stop.
• In ACCESSORY mode, the accessory icon is
illuminated and the spray volume keeps at the
maximum of "100".
• Stand the appliance upright, remove the
accessory hose, the appliance will enter AUTO
mode.
Fig.C-11
Note:
Keep sharp objects away from the digital display
screen to avoid scratches and scrapes.
Indicator
When in Use
MAX mode
Spray volume indicator:
solid "100".
Appliance enters standby
mode when stand upright in
Max mode.
button to enter
button to enter
28
AUTO mode
Spray volume indicator:
changes.
Appliance enters standby
mode when stand upright in
Auto mode.
DRY mode
Spray volume indicator:
Solid "0", dryness indicator
illuminated.
ACCESSORY mode
Spray volume indicator:
solid "100".
Accessory icon: illuminated.
Appliance enters standby
mode when reclined in
Accessory mode.
Accessory icon: blinks.
Spray volume indicator:
solid "0".
See Troubleshotting.
AUTO icon: blinks.
Spray volume indicator:
solid "0".
See Troubleshotting.
Solid red light: dirt sensor
malfunction or blocked.
Indicator blinking: CWT is
empty.
Indicator blinking: DWT is full
or not installed, or the channel
has a blockage.
Indicator blinking: brush roller
cover is not installed or brush
roller has a blockage.